No one likes funky-smelling water. When your fridge's water tastes stale or your ice cubes are cloudy and weird, you know it's time for an LG water filter replacement.
A good reason for keeping the fridge water filter fresh is more than just decent water taste: it's also that it'll keep the water clean, and your fridge running in good health, and this way, you won't be gulping any nasty contaminants. This DIY guide aims to guide all LG refrigerator owners on how to obtain clean and crisp water without the need for an expert.
So, let's jump in and explain how to change LG refrigerator filter.
Why You Should Regularly Replace Your LG Refrigerator Water Filter?
If you haven't turned that filter-replace indicator on your LG refrigerator for ages, you're in good company. So, here are the reasons you might want to go for LG water filter replacement.
-
A Clogged Filter Means Filthy Water
Over time, impurities such as chlorine and dirt get lodged within the filter, and who knows what else gathers there. Once they are blocked, the water filter cannot perform its duty, thus ruining its taste and mixing up with contamination levels as well.
-
Overworking the Fridge
The clogged filter would require the refrigerator to push with extra effort to get the water through, which does not augur well for its long-term performance. Replacing them regularly will help keep everything in good condition.
-
Health and Safety First
Older filters will not be able to remove impurities from the water, hence bacteria, lead, or suchlike will be poured into your very own glass. Quite uninviting, don’t you think so?
How often to change it?
The acceptable advice that the brand recommends is to change the LG refrigerator water filter every six months unless, of course, the water flow goes down or there is a tangible difference in taste, in which case the earlier substitute would be more fitting.
How to Find the Right LG Water Filter for Your Refrigerator Model?
Before jumping to purchase a new filter, you must ensure that you are getting the right one for your refrigerator. Here is how to do it:
-
Check the model of the fridge
Open the door of your fridge and check inside. The model number is usually found on most LG models as a sticker on the inner wall or the door frame. Write it down, or take a quick picture and note it later.
-
Know the Common LG filter types
LG has various filter types, and the most common are:
-
LT700P- fitting most French door models
-
LT800P- for some of LG's newer models
-
LT1000P- newer models
-
LT600P- older models.
You may also check your fridge manual or the previous filter for the right one.
-
Where to Buy an Original LG Water Filter?
In this case, there is no substitute for the original filter. Genuine LG water filter replacements work best and are certified safe products. Check the LG official site, Amazon, big retailers like Home Depot, and local appliance stores for the original product.
Step-by-Step Guide to Replacing Your LG Refrigerator Water Filter
With the right filter in hand, you can easily replace your water filter. All you need to do is follow the below-mentioned LG fridge filter instructions.
Step 1: Find the Water Filter
It should either be in one of two spots:
-
Inside the fridge, right up near the top-right corner
-
Down at the base grille in the bottom front of the fridge
Before you continue on to step two, do find yours.
Step 2: Water Supply Turn-off (If Required)
Not all LG fridges need you to turn off the water, but check to find out if you're lucky not to need to here and look for the manual. If your model allows for a quick swap without turning off the water, even better!
Step 3: Remove the Older Filter
To remove an ordinary LG filter, you can either follow the twist method or the push-button release method.
-
Twist Method: Grasp the filter, twist a quarter turn counterclockwise, and pull straight out.
-
Push-Button Release Method: Press the release button at the sides of a filter and pull it out.
Some filters will have slight resistance-Jiggle it slightly, and it should go.
Step 4: Insert the New Filter
Get the shiny new filter:
-
Put it in line with the slot.
-
Make sure to push it in tightly until you hear/feel a click into position.
-
For twist models, give it a quarter turn clockwise until fitted.
Boom! You successfully got an LG water filter replacement.
Step 5: Flush the Water System
Now run a water cycle to get the air bubbles and carbon particles out of the new filter before drinking.
-
Flush about with 2-4 gallons of water.
-
If your refrigerator has an ice maker, throw away the first couple of batches of ice.
Yes, this is a bit over the top, but trust us you don't want to drink that first cup or two of water.
Step 6: Reset the Water Filter Indicator
A filter replacement light is a common component of most LG refrigerators and must be reset. Here's how:
-
Press on the "Water Filter" or "Reset" button and continue holding it down for a total of 3-5 seconds, stopping once the light turns off.
If your model does not come equipped with a reset button, consult your manual for specific instructions.
Bonus Tip: Keep an extra filter so you'll be prepared for the next change in six months.
Conclusion
And that was it! So you now know that changing LG refrigerator filter is easier than making instant noodles, and you can easily get clean, great-tasting water again.
So, don’t put it off any longer—get your LG water filter replacement from the National Filter Warehouse today and keep that water fresh and clean!
FAQs About LG Refrigerator Water Filter Replacement
-
How do I know if my filter is installed correctly?
Your LG refrigerator filter should fit securely and should not wobble after installation. Try running some water through the dispenser. If it flows smoothly without leaks, you've done a fine job!
-
Can I use third-party water filters?
While some off-market filters may fit, they may not be certified to remove a certain contaminant effectively. Stick to the genuine LG filters if you wish to be on the safe side.
-
What happens if I don’t replace the filter?
Some causes of unpleasant taste in water and slow water flow are blockages in the filter, which may subject customers to other harmful contaminants. Regular LG refrigerator filter replacements help keep the water clean and running, free of any hindrances.
-
How to reset the filter light?
Press and hold the "Water Filter" or "Reset" button on your LG refrigerator for 3-5 seconds until the indicator light goes off. If some models have no option for an indicator light, check your manual for the method of resetting it.