Using a new Samsung refrigerator water filter is essential to achieve clear and tasty water and for the refrigerator to function well. However, at some point, these filters have to be replaced because of sediment deposition. If they are not changed, then the water passing through these filters may carry pollutants, which may be dangerous to the health of the consumers.
Samsung usually recommends that the filter be changed every half a year. It not only enhances the water quality but also enables the refrigerator to retain its original performance. Although many think replacing a Samsung refrigerator water filter is difficult, it’s actually not! You just need to follow the right steps! So, today, in this article, we will teach you the basic DIY steps to replace your old Samsung refrigerator water filter in minutes.
From choosing a compatible filter to replacing it step-by-step, we’ll guide you thoroughly. We’ll also present you with some troubleshooting tips for common problems that you might face while changing the filter. In addition, you’ll get to learn how to reset the water filter indicator so that you can easily get notified the next time it needs replacement.
So, what are you waiting for? Delve into this DIY guide right away and become a pro in replacing your Samsung refrigerator water filter!
Why Replace Your Samsung Refrigerator Water Filter?
Over time, refrigerators get filled with sediment, chlorine, and contaminants common in most tap water as the filter becomes saturated. These elements accumulate in the filter's porous material. These particles clog the pores, restricting water flow and reducing filtration efficiency. For instance, if a filter is blocked, the dispenser will discharge poor-quality water, and it will reduce the efficiency of the refrigerator as well. This means that using an old filter might cause damaging elements to pass through and put your family’s health at risk. It can lead to potential health issues such as:
- Respiratory issues
- Heavy metal poisoning
- Poor immune system
- Gastrointestinal issues
- Chemical poisoning
- Kidney failure
Drinking the water or using the ice produced from the replaced filter ensures that it is free from contaminants in terms of taste and quality. Regular replacement also prevents unpleasant odors or cloudiness in your water, giving you peace of mind with every sip. According to Samsung, water filters should be replaced every 6 months for better performance of the refrigerator.
However, this schedule may vary depending on the usage of water and the quality of water in specific regions. Skipping the filter replacement will consequently affect the water supply and flow rate and may even harm your internal refrigerator parts. The necessity of proper use and replacement of water filters according to Samsung standards allows refrigerators to last longer and, at the same time, offer fresh and safe drinking water.
This is because it removes harmful contaminants like chlorine, sediments, and bacteria to improve the water quality. It is not a big deal to buy a new refrigerator water filter, but that small change will indeed have numerous benefits for your health and your appliance.
What You Need to Know Before Replacing the Filter?
Samsung employs different kinds of filters, including HAF-CIN, HAF-QIN, and HAF-CUI filters. HAF-CIN filter is effective in removing odor, chlorine, and heavy metals. The HAF-QIN filter enhances water taste and clarity by targeting micro-particles, while the HAF-CUI filter improves the quality of water by reducing harmful contaminants.
To choose a suitable filter, consult the manufacturer’s instructions on your refrigerator or locate the model number of the present filter. Here are some resources or tools you can refer to if you need assistance in identifying your Samsung refrigerator model and compatible filter type.
- Owner or user manual: Look for information about models and compatible filters.
- Refrigerator label: Check the inside or door of your refrigerator for its model number.
- Samsung’s website: Look for their support pages or contact.
- Filter guide: Check the existing filter for type or part number.
Samsung has original filters that should be used when buying a replacement refrigerator water filter. Authentic filters are produced for your refrigerator to meet the manufacturer’s specifications of filtration and efficiency. The use of third-party or imitation filters could harm the water quality and potentially harm your refrigerator.
When looking for the right Samsung filter, you should think about purchasing products only from authorized stores or high-reputation online shops. It is important to research on your own to know what to expect and prepare to make the refrigerator replacement process easier and faster. This simple preparation step ensures that you’ll enjoy clean, filtered water without any interruptions.
Step-by-Step Guide to Replacing Your Samsung Refrigerator Water Filter
Follow these simple steps to replace your Samsung refrigerator water filter:
Step 1: Turn off the water supply
Before removing the refrigerator, try to isolate the area by closing all the supply shut-off valves that supply water to the refrigerator.
Step 2: Locate the water filter
Samsung refrigerator filter location depends on the particular model of the device; it can be located inside the refrigerator, in the top right corner, or on the bottom grill.
Step 3: Remove the old filter
Depending on the model, the filter may be twisted off or pushed in. To unlock it, twist it clockwise or pull it out. It is also important to have a towel nearby to help wipe up any falling water.
Step 4: Prepare the new filter
Take the improved filter and open it; if it has caps or seals that cover the filter, remove them. Ensure correct filter installation by aligning its arrow or guide marks with the housing.
Step 5: Insert the new filter
Screw the filter further into the housing or turn it clockwise until it locks securely in place. Make sure it is well fastened so it does not leak.
Step 6: Turn the water supply back on
After installing the filter, the water supply should be turned back on, and any leaks should be noticed. Wash the dispenser for 2–3 minutes with water so as to remove the air and carbon particles from the new filter. Some common problems, which may be a leak or the filter not fitting properly, can be solved by installing genuine Samsung filters and reducing pressure prior to installation. Do not over-tighten the filter, as it will help avoid any leakage.
How to Reset the Water Filter Indicator?
Samsung refrigerator water filters should be reset following filter change to ensure you are informed of when it is time to replace the filter again. The reset process varies depending on the refrigerator model, but the steps are generally straightforward:
Locate the reset button
Sometimes, the light on the refrigerator's control panel illuminates the words “filter reset” or “reset.”
Press and hold the button
Press the button for 3-5 seconds until the device's LED light goes out or the blinking stops. In some cases, you must press two buttons at the same time: “Ice Type” and “Child Lock,” for instance.
Verify the reset
The filter indicator light should no longer be illuminated, signaling that the reset was successful. Consult the user manual of your particular model if these guidelines fail to help, but should all else fail, contact the retailer.
Resetting the indicator helps you receive future reminders for the replacements necessary for maintaining clean and safe water. By resetting the filter indicator, you will always ensure your refrigerator is working as it is supposed to and not expose your foods and drinks to the dangers of having a spoilt filter.
Conclusion
Filter replacement for Samsung refrigerators enables the provision of clean, safe, and fresh-tasting water and enhances the appliance's effectiveness.
Follow the guidelines mentioned above for a simple and cost-efficient method to change the filter yourself. Get genuine Samsung filters at National Filter Warehouse and take advantage of filtered water now!
Frequently Asked Questions
How often should I replace my Samsung water filter?
It is recommended to replace your Samsung water filter every six months or based on more frequent usage and low quality of water.
Can I use third-party filters?
You may use third-party filters when the original filter is unavailable, but they must be NSF-certified to meet safety standards. However, even if a third-party filter may work, it is advised to use genuine Samsung filters because of their efficiency, quality, and compatibility with your fridge.
What if my water tastes strange after replacement?
The new filter should be rinsed for about 2-3 minutes of running water to allow air and carbon particles to clear for fresh, clear water.
How do I know which filter is right for my Samsung refrigerator?
For model numbers and filter recommendations, you should look into the refrigerator’s instruction manual or the previous filter or use the Samsung filter cross-reference tool for right filter matching.